Thiết bị mạng wifi Ruijie RG-AP130L ( Lắp đặt gắn tường )
RUIJIE RG-AP130 (L) được thiết kế chuyên biệt lắp đặt không dây tại các khách sạn, văn phòng và tòa nhà dân cư. Với thiết kế ngắn gọn, tinh tế giúp lắp đặt dễ dàng và mang tính thẩm mĩ cao. Hãy cùng tìm hiểu những tính năng thông minh của sản phẩm này nhé!
RG-AP130 (L) cho phép hoạt động với hiệu suất cao, không bị gián đoạn đối với lớp hoàn thiện bên trong. Và cung cấp giải pháp tốt nhất cho những công trình với thiết kế nội thất tinh tế. Sản phẩm với băng tần kép, hai băng tần hỗ trợ hoạt động đồng thời của 802.11a/n/ac và 802.11b/g/n.
Cung cấp tốc độ dữ liệu lên tới 300Mbps trong 802.11n và 867Mbps trong 802.11ac. Bên cạnh đó, thiết bị cung cấp 4 cổng RJ-45 10/100Mbps và 1 cổng thông qua Thoại/PoE (kết hợp RJ-11). Cung cấp vùng phủ sóng mạng không dây tối ưu và bảo vệ chi phí với giao diện mạng có dây và cổng thoại bổ sung. Vùng phủ sóng băng tần kép 2,4 và 5G có thể cung cấp tốc độ dữ liệu lên tới 300Mbps ở 802.11n và 867Mbps ở 802.11ac, mang đến trải nghiệm mạng tuyệt vời.
Standard: Anti-theft screws and ordinary screws
Optional: Lock and key
Color Plate Cover Options
White, black, silver and gold
LED Indicator
1 LED status indicator (hidden) (configurable to switch off)
IP Rating
IP41
WLAN
Maximum clients per AP
Up to 32
BSSID Capacity
Up to 8 per radio
Up to 16 per AP
SSID hiding
Support
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID
Support
Remote Intelligent Perception Technology (RIPT)
Support
Intelligent identification of smart device
Support
Intelligent load balancing based on the number of users or traffic
Support
STA control
SSID/radio-based
Bandwidth control
STA/SSID/AP-based speed control
Preference for 5 GHz (band select)
Support
802.11w
Support
Dynamic Frequency Selection (DFS)
Support
Security
PSK, Web, and 802.1x authentication
Support
Data encryption
WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits)
QR code authentication
Support
SMS authentication
Support
PEAP authentication
Support
Data frame filtering
Whitelist, static/dynamic blacklist
User isolation
Support
Rogue AP detection and countermeasure
Support
Dynamic ACL assignment
Support
RADIUS
Support
CPU Protection Policy (CPP)
Support
Network Foundation Protection Policy (NFPP)
Support
Wireless Intrusion Detection System (WIDS)
Support
Wireless Intrusion Prevention System (WIPS)
Support
Remote probe
Future release support
L2 Features
IGMP snooping
Support
VLAN features
Support
Routing
IPv4 address
Static IP address or DHCP reservation
IPv6 transparent transmission
Support
Multicast
Multicast to unicast conversion
Location-based Service
Wireless position tracking
Support
Management and Maintenance
Network management
SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management
Visualized wireless heat map analysis
Support
Real-time spectrum analysis
Support
Fault detection and alarm
Support
Statistics and logs
Support
FAT/FIT switching
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
Standard: Anti-theft screws and ordinary screws
Optional: Lock and key
Color Plate Cover Options
White, black, silver and gold
LED Indicator
1 LED status indicator (hidden) (configurable to switch off)
IP Rating
IP41
WLAN
Maximum clients per AP
Up to 32
BSSID Capacity
Up to 8 per radio
Up to 16 per AP
SSID hiding
Support
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID
Support
Remote Intelligent Perception Technology (RIPT)
Support
Intelligent identification of smart device
Support
Intelligent load balancing based on the number of users or traffic
Support
STA control
SSID/radio-based
Bandwidth control
STA/SSID/AP-based speed control
Preference for 5 GHz (band select)
Support
802.11w
Support
Dynamic Frequency Selection (DFS)
Support
Security
PSK, Web, and 802.1x authentication
Support
Data encryption
WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits)
QR code authentication
Support
SMS authentication
Support
PEAP authentication
Support
Data frame filtering
Whitelist, static/dynamic blacklist
User isolation
Support
Rogue AP detection and countermeasure
Support
Dynamic ACL assignment
Support
RADIUS
Support
CPU Protection Policy (CPP)
Support
Network Foundation Protection Policy (NFPP)
Support
Wireless Intrusion Detection System (WIDS)
Support
Wireless Intrusion Prevention System (WIPS)
Support
Remote probe
Future release support
L2 Features
IGMP snooping
Support
VLAN features
Support
Routing
IPv4 address
Static IP address or DHCP reservation
IPv6 transparent transmission
Support
Multicast
Multicast to unicast conversion
Location-based Service
Wireless position tracking
Support
Management and Maintenance
Network management
SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management
Visualized wireless heat map analysis
Support
Real-time spectrum analysis
Support
Fault detection and alarm
Support
Statistics and logs
Support
FAT/FIT switching
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.